haier 0010557172 - Manual (Page 12)

11
Operation
DRY Operation
Remote controller
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1
o
C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
decrease 1
o
C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
3.Select temp.setting
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
LOW MED HI AUTO
4.Fan speed selection
5.Unit stop
Press ON/OFF button, the unit stops.
1. Unit start
Press ON/OFF on the indoor unit, or press ON/OFFon
the remote controller, unit starts.
Previous operation status appears on LCD display (no
timer and sleep).
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Then Select DRY operation
AUTO COOL DRY FAN HEAT
COOL operation starts when room
temp.is higher than temp.setting.
On reaching temp.setting +2 o C
unit will run in mild DRY mode.
Ultra-low air flow
Temp.setting+2 o C
Temp.setting
Air conditioner is running under displayed fan speed.
In DRY mode, when room temperature becomes
lower than temp.setting+2
o
C,unit will run intermittently
at LOW speed regardless of FAN setting.