HP P4827 - Manual (Page 15)

l1725.fm Page 14 Friday, March 1, 2002 1:11 AM 1
hp L1725 LCD Monitor
Setting Up the Monitor
To disconnect the cables from the monitor:
1 Turn off the power switch for the monitor and the computer, and
then turn off the main power source.
2 Disconnect the power cord from the main power source and the
DC adapter cable.
3 Disconnect the DC adapter cable from the connector at the rear of
the monitor base.
4 Disconnect the audio cables from the computer connectors.
5 Disconnect your USB devices from the monitor’s USB ports.
6 Unscrew the thumbscrews on the video cable(s) and disconnect the
video cable(s).
Securing your monitor
Your monitor can be secured to a desk or to any other fixed object,
using a security lock cable. The cable can be attached a slot located
on the rear of the monitor.
NOTE: The security lock is not an HP accessory. It cannot be
ordered from HP. Contact your retailer for more
information.
K
Slot for lock
14 English