Grounding – Harbor Freight Tools 68126 User Manual
Page 7
Page 7
For technical questions, please call 1‑800‑444‑3353.
SKU 68126
grounding
to preVent
eLeCtriC shoCK
and death From inCorreCt
grounding Wire
ConneCtion:
Check with a qualified electrician
if you are in doubt as to whether
the outlet is properly grounded.
do not modify the power cord
plug provided with the tool.
never remove the grounding
prong from the plug. do not use
the tool if the power cord or plug
is damaged. if damaged, have it
repaired by a service facility
before use. If the plug will not fit
the outlet, have a proper outlet
installed by a qualified
electrician.
double insulated tools: tools with
two prong plugs
outlets for 2‑prong plug
Tools marked “Double Insulated” do not
1.
require grounding. They have a special
double insulation system which satisfies
OSHA requirements and complies with
the applicable standards of Underwriters
Laboratories, Inc., the Canadian
Standard Association, and the National
Electrical Code.
Double insulated tools may be used in
2.
either of the 120 volt outlets shown in the
preceding illustration.
(see outlets for
2‑prong plug.)
extension Cords
note: Extension cords must not be used with
this item’s charger.
symbology
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
a
Amperes
n0 xxxx/min.
No Load Revolutions per Minute
(RPM)