Troubleshooting, Please read the following carefully – Harbor Freight Tools 68126 User Manual
Page 12
Page 12
For technical questions, please call 1‑800‑444‑3353.
SKU 68126
troubleshooting
problem
possible Causes
Likely solutions
Tool will not start.
Battery not installed or properly
1.
charged.
Internal damage or wear.
2.
(Wiring or Trigger, for example.)
Check that battery is properly installed and fully
1.
charged.
Have technician service tool.
2.
Performance
decreases over time.
Accessory dull or damaged.
1.
Carbon brushes worn or
2.
damaged.
Keep cutting accessories sharp. Replace as
1.
needed.
Have qualified technician replace brushes.
2.
Excessive noise or
rattling.
Internal damage or wear.
(Motor bearings, for example.)
Have technician service tool.
Overheating.
Forcing tool to work too fast.
1.
Accessory misaligned.
2.
Accessory dull or damaged.
3.
Blocked motor housing vents.
4.
Allow tool to work at its own rate.
1.
Check and correct accessory to fence and/or
2.
table alignment.
Keep cutting accessories sharp. Replace as
3.
needed.
Wear ANSI-approved safety goggles and
4.
NIOSH-approved dust mask/respirator while
blowing dust out of motor using compressed air.
Follow all safety precautions whenever diagnosing or servicing the tool.
disconnect battery before service.
pLease read the FoLLoWing CareFuLLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
ExPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY
CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK
AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT
PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
record product’s serial number here:
note: If product has no serial number, record month and year of purchase instead.
note: Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts.