Harbor Freight Tools Angle Drill With Keyless Chuck 92188 User Manual

Angle drill, With keyless chuck operating instructions, Safety warnings and precautions

Item 92188

Angle Drill

With Keyless Chuck

Operating Instructions

3491 Mission Oaks Blvd., Camarillo, CA 93011

'LVWULEXWHGH[FOXVLYHO\E\

+DUERU)UHLJKW7RROV

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of

personal injury and damage to equipment.

Read all instructions before using this product!

Do not exceed 6,000 RPm maximum speed.

Avoid working alone

. If an accident happens, an assistant can bring help.

Keep work area clean

. Cluttered areas invite injuries.

Keep children away

. Children must never be allowed in the work area. Do not let them handle ma-

chines, tools, or extension cords.

2004 by Harbor Freight Tools

of this manual or any artwork contained herein may be reproduced in any shape

or form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353.

Thank you for choosing a Harbor Freight Tools product! For future reference, please com-

plete the owner’s record below:

model:___________________ Purchase Date:__________________

Save the receipt, and these instructions. It is important that you read the entire instruction

sheet to become familiar with this product before you begin using it.

Technical Specifications:

Angle Drill includes 3/8” Shaft Attachment

Hex Shaft Size: 5/16”

Spindle Thread: 3/8” - 24

Maximum Speed: 6000 RPM

ReV 09b