Harbor Freight Tools Demolitin Hammer 68148 - Manual (Page 8)

Page 8 For technical questions, please call 1‑800‑444‑3353. SKU 68148
Flat Chisel
Chuck (35)
Side Handle (62)
Main
Handle
(74)
Trigger
(69)
Carbon Brush
Cap (54)
Oil Tank Cover (12)
Figure 1
SPECIFICATIONS
Electrical
Input
120 V~ / 60 Hz / 10 A
Blows Per
Minute
3100 BPM
Chisels
(included)
1 Bull Point
1 Flat Point
Other
Accessories
1 Oil Bottle
1 Carbon Brush Set
1 5mm Hex Key
1 Oil Tank Wrench
UNPACKING
When unpacking, make sure the item is intact and undamaged. If any parts are missing
or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible.
INSTRUCTIONS FOR PUTTING INTO USE
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following
pages, refer to the Assembly Diagram near the end of this manual.
Functions
Use Figure 1 below as reference during Tool Setup and Operation.