Harbor Freight Tools Demolitin Hammer 68148 - Manual (Page 4)

Page 4 For technical questions, please call 1‑800‑444‑3353. SKU 68148
e. Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If damaged,
have the power tool repaired before
use. Many accidents are caused
by poorly maintained power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely
to bind and are easier to control.
g. Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed.
Use of the power tool for operations
different from those intended could
result in a hazardous situation.
5. Service
a. Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of
the power tool is maintained.
Breaker Hammer Safety Warnings
1. Wear ear protectors. Exposure to
noise can cause hearing loss.
2. Use auxiliary handles supplied
with the tool. Loss of control
can cause personal injury.
3. Hold power tools by insulated
gripping surfaces when performing
an operation where the cutting tool
may contact hidden wiring or its
own cord. Contact with a ″live″ wire
will make exposed metal parts of the
tool ″live″ and shock the operator.
4. Keep clear of moving parts.
5. Unplug before inspecting,
removing or installing chisel,
or performing any service.
6. Pull on chisel after installation
and before use; chisel may move
but MUST NOT slide out.
7. Do not operate this tool if you have
back, neck, or wrist injuries, or other
conditions that will be aggravated
by the severe jerking forces that this
tool exerts upon the operator.
8. Maintain labels and nameplates
on the tool. These carry important
safety information. If unreadable
or missing, contact Harbor Freight
Tools for a replacement.
9. Avoid unintentional starting. Prepare to
begin work before turning on the tool.
10. Do not lay the tool down until it has
come to a complete stop. Moving
parts can grab the surface and
pull the tool out of your control.
11. When using a handheld power tool,
maintain a firm grip on the tool with
both hands to resist starting torque.
12. Do not leave the tool unattended when
it is plugged into an electrical outlet.
Turn off the tool, and unplug it from
its electrical outlet before leaving.
13. This product is not a toy. Keep
it out of reach of children.
14. People with pacemakers should
consult their physician(s) before use.
Electromagnetic fields in close proximity
to heart pacemaker could cause
pacemaker interference or pacemaker
failure. In addition, people with
pacemakers should:
• Avoid operating alone.
• Properly maintain and inspect to avoid
electrical shock.