Emerson Radio GP815 - Manual (Page 4)

3
This device complies with part 15 of the FCC rules. Operation is subject to the
condition that this device does not cause harmful interference.
Avoid installing the unit in locations described below:
• Places exposed to direct sunlight or close heat radiating appliances such as
electric heaters.
• Dusty places.
• Places subject to constant vibration.
• Humid or moist places.
POWER SOURCE
This radio is designed to operate on normal 120V 60Hz AC power only. Do not
attempt to operate the radio on any other power source. You could cause damage
to the radio that is not covered by your warranty.
This radio should be connected to an AC outlet that is always ‘live’. Do not connect
it to an outlet that is controlled by a wall switch. When the power to the radio is
interrupted, the Sure Alarm battery back up system takes over to maintain the time
and alarm settings. To maximize the life of the back up battery, keep the radio
connected to a ‘live’ AC outlet at all times.
This radio uses a polarized AC plug which has one blade wider than the other. This
plug will only fit into a polarized AC outlet.
This is a safety feature. If the plug will not
fit, you may have an older non-polarized
AC outlet. Do not defeat the safety feature
by trying to file the wider blade, or replacing
the plug. Contact an electrician to replace
your outdated outlet.
AC Plug
AC Outlet
IMPORTANT NOTES
GP815_ib082003.p65 20/8/2003, 11:43 3