Exmark Commercial 21 4500-686 Rev. B - Manual (Page 8)

Safety
• Use extreme care when loading or unloading the
machine into a trailer or truck.
• Use care when approaching blind corners, shrubs,
trees, or other objects that may obscure vision.
Slope Operation
Use Extreme caution when mowing and/or turning
on slopes as loss of traction and/or tip-over could
occur. The operator is responsible for safe operation
on slopes.
DANGER
Operating on wet grass or steep slopes can
cause sliding and loss of control. Loss of control
and/or loss of operator’s footing could result in a
fall with an arm or leg getting under the mower
or engine deck which may result in serious
injury, death or drowning.
• Mow across slopes, never up and down.
• Do Not mow slopes when grass is wet.
• Do Not mow near drop-offs or near water.
• Do Not mow excessively steep slopes.
• Reduce speed and use extreme caution on
slopes.
• Avoid sudden turns or rapid speed changes.
• When feasible, avoid operating the equipment in
wet grass.
• Progressively greater care is needed as the slope
increases.
• Remove or mark obstacles such as rocks, tree
limbs, etc. from the mowing area. Tall grass can
hide obstacles.
• Watch for ditches, holes, rocks, dips and rises that
change the operating angle, as rough terrain could
overturn the machine.
• Use extreme care with grass catchers or
attachments. These can change the stability of the
machine and cause loss of control.
Maintenance and Storage
• Stop the engine and remove the spark plug
wire(s). Wait for all movement to stop before
adjusting, cleaning or repairing.
• Keep engine and engine area free from
accumulation of grass, leaves, excessive grease
or oil, and other debris which can accumulate
in these areas. These materials can become
combustible and may result in a fire.
• Let engine cool before storing and Do Not store
near flame or any enclosed area where open pilot
lights or heat appliances are present.
• Shut off fuel while storing or transporting. Do
Not store fuel near flames or drain indoors.
• Park machine on level ground. Never allow
untrained personnel to service machine.
• Remove spark plug wire before making any
repairs.
• Use care when checking blades. Wrap the blade(s)
or wear gloves, and use caution when servicing
them. Only replace damaged blades. Never
straighten or weld them.
• Keep hands and feet away from moving parts.
If possible, Do Not make adjustments with the
engine running.
• Keep all guards, shields and all safety devices in
place and in safe working condition.
• Check all bolts frequently to maintain proper
tightness.
• Frequently check for worn or deteriorating
components that could create a hazard.
WARNING
Removing standard original equipment parts,
or using non-Exmark replacement parts and
accessories may alter the warranty, traction, and
safety of the machine. Failure to use original
Exmark parts could cause serious injury or
death.
Replace all parts including, but not limited to,
tires, belts, and blades with original Exmark
parts.
8