Emerson Radio MP200 - Manual (Page 5)

5
PREPARATION FOR USE
POWER SOURCES
This player is designed to operate on one alkaline “AAA” batteries, not
included. Attempting to operate this unit on any other power source
may cause damage to the unit and such damage is not covered by
your warranty.
INSTALLING THE BATTERIES
The battery compartment is located on the top of the cabinet.
1.) Slide the battery compartment cover outward, and then up.
2.) Insert one fresh “AAA” alkaline battery in the
battery compartment. Be sure to follow the polarity
marking in the battery compartment. If the battery
is inserted incorrectly the unit will not work.
3.) Push down on the battery compartment cover,
and then slide inward to close.
WHEN TO CHANGE THE BATTERY
When the battery is getting weak, the indicator
changes from “
” (full battery) to “ ” (replace
battery) in the display, the batteries are almost
exhausted and should be changed as soon as
possible. Do not leave weak or exhausted batteries
in the player as they will eventually leak and cause
corrosion inside the battery compartment.