Epson 730c - Manual (Page 41)

Using the Remote Control 35
Replacing the Battery
Follow these steps to replace the battery:
1. Press the tab towards the center of the remote and slide the
battery tray out of the remote control.
2. Remove the old battery and insert a CR2025 watch battery as
shown.
3. Slide the battery tray back into the remote.
caution
When replacing batteries,
take the following
precautions:
■ Replace the battery as soon
as it runs out. If the battery
leaks, wipe away battery
fluid with a soft cloth. If
fluid gets on your hands,
wash them immediately.
■ Do not expose batteries to
heat or flame.
■ Dispose of used batteries
according to local regulations.
■ Remove the battery if you
won’t be using the projector
for a long period of time.
tab
720-730.book Page 35 Thursday, October 30, 2003 11:32 AM