Edelbrock 2161 User Manual
Page 2
Catalog #2161, 3761, 7161, 7163, 7164, 7561, 7562, 75613
Rev. 1/08 - AJ/mc
©2008 Edelbrock Corporation
Brochure #63-0120
Page 2 of 4
•
CARBURETOR RECOMMENDATIONS:
Manifold 2161, 3761 (Emissions Controlled Applications):
Manifold 2161 (Non-Emissions):
Manifold 7161, 7163, 7561, 7562, 75613 (Non-Emissions):
•
THROTTLE BRACKETS: Due to the design of Performer manifolds, the throttle and kickdown bracket on some vehicles may require
modification to fit. See figure 1 for guidelines or purchase our #8031, 8030 or 8036 throttle, cruise, and kickdown linkage brackets
•
GASKETS: Do not use competition style intake gaskets for this street manifold. Due to material deterioration over time, internal leakage of
vacuum, oil, and coolant may occur.
A - Carburetor will work with non-EGR or pre-emission control systems.
B - Carburetor will work with EGR system.
H - Carburetor has provision for evaporative canister.
I - Carburetor has no provisions for evaporative canister.
K - Carburetor requires #8008 or #8024 stud, washer and nut kit. Determine proper length based on gasket thickness and your accessory
mounting requirements.
N - Carburetor accepts factory cruise control
O - Carburetor comes with manual choke. It can be converted to electric choke using kit #1478.
P - Carburetor is not a stock replacement part
CARBURETOR
REFERENCE
PARTS REQUIRED FOR INSTALLATION
OEM 4BBL
B, H, N
#8036 throttle, cruise, & kickdown bracket for 1972-1978
CARBURETOR
REFERENCE
PARTS REQUIRED FOR INSTALLATION
Performer #1407 (750 cfm)
A, I, K, N, O
#8031 throttle, cruise, & kickdown bracket for 1972-1979
Performer #1411 (750 cfm)
A, I, K, N
#8031 throttle, cruise, & kickdown bracket for 1972-1979
Performer #1412 (800 cfm)
A, I, K, N, O
#8031 throttle, cruise, & kickdown bracket for 1972-1979
Performer #1413 (800 cfm)
A, I, K, N
#8031 throttle, cruise, & kickdown bracket for 1972-1979
Thunder Series #1812 (800 cfm)
A, I, K, N
#8031 throttle, cruise, & kickdown bracket for 1972-1979
Thunder Series #1813 (800 cfm)
A, I, K, N
#8031 throttle, cruise, & kickdown bracket for 1972-1979
CARBURETOR
REFERENCE
PARTS REQUIRED FOR INSTALLATION
Thunder Series #1805 (650 cfm)
A, I, K, N
#8031 throttle, cruise, & kickdown bracket for 1972-1979
Thunder Series #1806 (650 cfm)
A, I, K, N
#8031 throttle, cruise, & kickdown bracket for 1972-1979
Thunder Series #1825 (650 cfm)
A, I, K, N
#8031 throttle, cruise, & kickdown bracket for 1972-1979
Thunder Series #1826 (650 cfm)
A, I, K, N
#8031 throttle, cruise, & kickdown bracket for 1972-1979
Performer #1407 (750 cfm)
A, I, K, N, O
#8031 throttle, cruise, & kickdown bracket for 1972-1979
Performer #1411 (750 cfm)
A, I, K, N
#8031 throttle, cruise, & kickdown bracket for 1972-1979
Performer #1412 (800 cfm)
A, I, K, N, O
#8031 throttle, cruise, & kickdown bracket for 1972-1979
Performer #1413 (800 cfm)
A, I, K, N
#8031 throttle, cruise, & kickdown bracket for 1972-1979
Thunder Series #1812 (800 cfm)
A, I, K, N
#8031 throttle, cruise, & kickdown bracket for 1972-1979
Thunder Series #1813 (800 cfm)
A, I, K, N
#8031 throttle, cruise, & kickdown bracket for 1972-1979
INTAKE MANIFOLD
RECOMMENDED GASKET
2161, 3761, 7161, 7164, 7561, 75613
Edelbrock #7203 Port: 1.82” x 2.05”, .060” Thickness
7163, 7562
Edelbrock #7202 Port: 1.82” x 2.54”, .060” Thickness
NOTE: To ensure maximum performance and a proper seal, Edelbrock gaskets which are
specifically designed and manufactured for use with Edelbrock parts must be used.