Extreme Networks ALTITUDE 4700 - Manual (Page 11)

Altitude 4700 Series Access Point Installation Guide 11
Contact Extreme Networks support to report missing or improperly functioning items.
Access Point Power Options
The access point has the following power options:
● External power supply
● Power over Ethernet (PoE) from switch
● Power over Ethernet (PoE) from power injector
● An external power supply and PoE simultaneously
The access point can be powered using either a specific 48 volt power supply or a
specific POE Injector. The 48 volt power supply (part number 5014000247R) connects
directly into the access point's power connector since the access point would not be
reliant on POE supplied power.
The Power Injector (part number APPSBIAS1P3AFR) is a high-power POE Injector
delivering up to 30 watts
while merging power and Ethernet into one cable . The
access point can only use the Power Injector when connecting to the access point's GE1/
POE port. The APPSBIAS1P3AFR model Power Injector is a separately ordered
component.