Emerson Radio NR40 - Manual (Page 15)

1 4
Programmed Playback
This feature allows you to program up to 20 tracks on a disc for playback in any
desired order.
Note: You can program tracks while the disc is stopped or while the disc is
playing.
1.) Press the PROGRAM button to enter the Program Mode.
The Program number briefly shows ‘0 1’, then ‘0 0’ and the
PROGRAM indicator flash.
2.) Press the F.SKIP or B.SKIP buttons to select the first track
number you wish to enter in the program memory.
Example: Track Number ‘0 8’.
3.) When the desired track number appears on the display, press
the PROGRAM button again to enter that track in memory.
The Program number briefly shows ‘0 2’, then ‘0 0’ flashes.
4.) Repeat Steps 2-3, selecting a different track number each time until you have
entered up to 20 tracks in the program memory.
Note: You may program the same track number to play multiple times in
the program sequence if desired.
5.) Press the PLAY/PAUSE button to begin Programmed
Playback. The PROGRAM indicator stops flashing and
remains ‘On’.
Playback will begin with the first track you programmed and will continue until
the last programmed track has played.
PROGRAM
PROGRAM
PROGRAM
PROGRAM
NR40_110804.p65 8/11/2004, 10:05 14