Electrolux EWX 14450 W - Manual (Page 37)

6. Fill the smaller upper hole and the two
large ones with the corresponding
plastic plug caps supplied in the bag
containing the instruction booklet that
you will find inside the drum.
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the
machine is not impeded by carpets,
rugs etc. Check that the machine does
not touch the wall or other kitchen units.
Carefully level by screwing the
adjustable feet in or out. The machine
MUST be level and stable.
If necessary, check the setting with a
spirit level.
Any necessary adjustment can be made
with a spanner.
Accurate levelling prevents vibration,
noise and displacement of the machine
during operation. Never place
cardboard, wood or similar materials
under the machine to compensate for
any unevenness in the floor. After having
BI0007
BI0013
levelled the machine, tighten the lock
nuts.
Water inlet
An inlet hose is supplied and can been
found inside the machine drum. Do not
use the hose from your previous
machine to connect to the water supply.
1. Open the porthole and extract the
inlet hose.
2. Connect the hose with the angled
connection to the machine.
Do not place the inlet hose
downwards. Angle the hose to the
left or right depending on the
position of your water tap.
HEC0006
BI0008
installation electrolux 37
132962470.qxd 11/08/2008 11.20 Page 37