Eagle Electronics Cuda 128 Portable - Manual (Page 37)

33
Opening screen, Full Chart page, or mode. The factory default setting
has the Fish I.D. (fish symbols) turned on.
CHART SCROLL (stopping and starting)
In normal operation, the sonar chart will scroll from right to left across
the screen. You can stop the chart from scrolling across the screen. This
is useful when you want to "freeze" the picture to study it more closely.
To stop the chart, press MENU until the S CROLL S PEED
menu appears. Use
the DOWN ARROW to select M
IN
. The menu remains visible and a
stationary "Stop" message appears in the screen's top right corner.
To resume scrolling, use the UP ARROW to select M AX
(or any speed
other than minimum), then press PWR to clear the menu. For most
fishing conditions you should return the chart to maximum speed.
(Read more about this in the later entry on Chart Scroll Speed.)
NOTE:
You cannot clear the menu until you raise the chart speed again. If
you accidentally press
PWR to clear the menu while the chart is
stopped, you must press MENU until the S CROLL S PEED
menu
reappears, then follow the instructions from the preceding
paragraph.
Fish symbols
Grayline

Bottom signal
Digital depth
Depth range
at bottom of
depth scale
Surface signal
Water Temp
Structure
or cover