Summit 43 Inch Island Gas Cooktop Instruction Manual - Manual (Page 15)

14
components are not hot. The use of metal scouring pads, powder abrasives and
corrosive sprays must be avoided.
Do not allow vinegar, coffee, milk, salt water, lemon juice or tomato juice to remain in
prolonged contact with the surfaces.
WARNINGS: When reassembling the components, observe the following
recommendations:
Check that the holes in the burner heads "T-M" (Fig. 11-11c) are not blocked by
foreign bodies.
Be sure that the enameled covers "A", "B" and "C" (Figs. 11-11a and 11c) are
correctly positioned on the burner head. The covers are correctly positioned on the
head when they are perfectly stable.
If the opening and closing of any valve is awkward, do not force it but request
urgent intervention by the technical assistance service.
Do not use jets of steam to clean the appliance.
The pan support must be placed in the appropriate centering pins verifying the
perfect stability
To prevent difficulties with lighting, regularly clean the ignition elements (ceramic
and electrode) and safety cut-off switches.
IMPORTANT:
After removing the burners to clean them, be sure that all parts are correctly
positioned before relighting them.
FIG.11 FIG.11a
FIG.11b FIG.11c