beautypg.com

Important safety instructions, Important safety, Instructions – LG 30 Inch Double Oven Gas Range Owners Manual User Manual

Page 4: Warning, Caution, Anti-tip device

background image

4

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Read and follow all instructions when using the range to prevent the risk of fire, electric

shock, personal injury, or damage. This guide does not cover all possible conditions that

may occur. Always contact your service agent or manufacturer about problems that you do

not understand.

Download this owner's manual at: http://www.lg.com

This is the safety alert symbol. This symbol alerts you to potential hazards that

can result in property damage and/or serious bodily harm or death.

All safety messages will follow the safety alert symbol and either the word

WARNING or CAUTION. These words mean:

WARNING

- Indicates a hazardous situation which, if not avoided, could result

in death or serious injury.

CAUTION

- Indicates a hazardous situation which, if not avoided, could result

in minor or moderate injury.

ANTI-TIP DEVICE

WARNING

ALL RANGES CAN TIP

INJURY TO PERSONS COULD RESULT

INSTALL ANTI-TIP DEVICES PACKED WITH RANGE

SEE INSTALLATION INSTRUCTIONS

To avoid tipping, do not step or sit on the door. Install the anti-tip bracket packed with this

range.

- The range could be tipped and injury might result from spilled hot liquid, food, or the

range itself.

- If the range is pulled away from the wall for cleaning, service, or any other reason,

ensure that the anti-tip device is properly reengaged when the range is pushed back

against the wall.

Anti-tip bracket

Approximately

0.65" (16.5 mm)

Screw must

enter wood or

concrete

Wall plate

To reduce the risk of the range tipping over, the range must be secured by properly

installing the anti-tip devices.

To check that the anti-tip bracket is properly installed: Remove any items on the cooktop.

Grasp the top rear edge of the range back guard and carefully attempt to tilt it forward.

Verify that the anti-tip devices are engaged.

Remove the warming or storage drawers and visually inspect that the rear leveling leg is

fully inserted into the anti-tip bracket.

Refer to the installation manual for proper anti-tip bracket installation.