LG 30 Inch Double Oven Gas Range Owners Manual - Manual (Page 13)

13 INSTALLATION
ENGLISH
INSTALLATION
Before Installing the Range
Make sure your range is properly installed and grounded by a qualified installer, according to the installation
instructions. Any adjustment and service should be performed only by qualified gas range installers or service
technicians.
In the Commonwealth of Massachusetts
• This product must be installed by a licensed plumber or gas fitter.
• When using ball type gas shut-off valves, they must be the T-handle type.
• When using a flexible gas connector, it must not exceed 3 feet in length.
Preparing for Installation
Tools Needed
Phillips screwdriver
Open-end or adjustable
wrench
Pencil and ruler
Level
Flat-blade screwdriver
Pipe wrench (2)
(one for support)
Materials You May Need
• Gas line shut-off valve
• Pipe joint sealant that resists action of natural and LP gases
• Flexible metal appliance connector ( 3 /
4
" or 1 /
2
" NPT x 1 /
2
" I.D.)
Never use an old connector when installing a new range.
• Flare union adapter for connection to gas supply line ( 3 /
4
" or 1 /
2
" NPT x 1 /
2
" I.D.)
• Flare union adapter for connection to pressure regulator on range ( 1 /
2
" NPT x 1 /
2
" I.D.)
• Liquid leak detector or soapy water
• Lag bolt or 1 /
2
" O.D. sleeve anchor (for concrete floors only)