beautypg.com

Burner locations, Setting the flame size, 22 burner locations 22 setting the flame size – LG 30 Inch Double Oven Gas Range Owners Manual User Manual

Page 22: Caution, Using the gas surface burners

background image

22

OPERATION

Burner Locations

Your gas range cooktop has four or five sealed gas

burners, depending on the model. These can be

assembled and separated. Follow the guide below.

LDG4315 / LDG4313

LDG4311

1

1

4

2

2

3

3

1 Medium and Large Burner

The medium and large burners are the primary

burners for most cooking. These general

purpose burners can be turned down from

Hi

to

Lo

to suit a wide range of cooking needs.

2 Small Burner

The smallest burner is used for delicate foods

such as sauces or foods that require low heat for

a long cooking time.

3 Extra Large Burner

The extra large burner is the maximum output

burner. Like the other four burners, it can be

turned down from

Hi

to

Lo

for a wide range

of cooking applications. This burner is also

designed to quickly bring large amounts of liquid

to a boil. It can be used with cookware 10 inches

or larger in diameter.

4 Oval Burner (LDG4315ST / LDG4313ST)

The center, oval burner is for use with a griddle

or oval pots.

Using the Gas Surface Burners

1

Be sure that all of the surface burners and grates

are placed in the correct positions.

2

Place cookware on the grate.

3

Push the control knob and turn to the

Lite

position.

The electric spark ignition system makes a

clicking noise.

4

Turn the control knob to control the flame size.

CAUTION

Do not attempt to disassemble or clean around

any burner while another burner is on. All the

burners spark when any burner is turned to

Lite

.

An electric shock may result causing you to knock

over hot cookware.

Setting the Flame Size

Watch the flame, not the knob, as you reduce heat.

Match the flame size on a gas burner to the cookware

being used for fastest heating.

CAUTION

Never let the flames extend up the sides of the

cookware.

NOTE

The flames on the surface burners may burn

yellow in the presence of high humidity, such as

a rainy day or a nearby humidifier.

After LP gas conversion, flames can be bigger

than normal when you put a pot on the surface

burner.