Electrolux U30056 EFI 635 - Manual (Page 9)

9
Charcoal filter
• The charcoal filter should only be used if you
want to use the hood in the recirculation
function.
• To do this you will need an original
ELECTROLUX charcoal filter (available from
your local Service Force Centre).
• The charcoal filter cannot be washed nor
regenerated.
The charcoal filter should be replaced every 12
months under normal use.
Replacement filters are available from your
local Service Force Centre.
Fitting
Remove the grid or the metal grease filter.
Place the carbon filter to cover the grille that
protects the extraction motor (ONLY EFI 635:
The arrow printed on the charcoal filter must
correspond to the arrow printed on the
conveyor. Fig. 7.)
Turn the filter clockwise in order to lock the
filter into position.
Remount the grid or the metal grease filter.
• To remove proceed in the reverse order.
• Always specify the hood model code number
and serial number when ordering replacement
filters. This information is shown on the rating
plate located on the inside of the unit.
• The charcoal filter can be ordered from your
local ELECTROLUX Service Force Centre.
Changing the light bulb
• Disconnect the cooker hood from the mains
supply.
• Remove the grid or the metal grease filter.
• Replace the old bulb with a new one of the
same type.
• Remount the grid or the metal grease filter.
• If the light does not come on, make sure the
bulb has been inserted correctly before
contacting your local Service Force Centre.
Fig. 7 - EFI 635
EFI 640 = 2 charcoal filters
Arrows