Ericsson HM121dp - Manual (Page 23)

Verifying your ADSL Connection
EN/LZT 108 6429 R1 23 (47)
May 2003
Figure 17: Control Panel - Physical Link tab
State indicates TRAINING when the ADSL line is "training" to achive the optimum
transmission rate. Once the line is trained the indication is changed to DATA. When
no ADSL signal is present the indication is NO SIGNAL.
Modulation shows the ADSL mode used. The setting is determined by the service
offered by your ADSL service provider and is normally either T1.413, G.Dmt or
G.Lite.
Data Rate(kbps) shows the transmission rate. The value for "Transmit" shows the
speed (kbps) from your computer to the ISP/service provider (uploading), while the
value for "Receive" shows the speed from the ISP/service provider to your computer
(downloading).
The indicator (circle) below Link Status blinks green when the ADSL line is
"training" to achieve the optimum transmission rate, and turns solid green when the
line is trained and ready for use. Individual flashing yellow indicators show the "Data
Activity" separately.
4.2.2 System Information
The "System Info" tab includes information about the release number of the modem
driver and firmware as well as the version of the Control Panel.