Extron electronic TP T 15HD 45 - Manual (Page 11)

TP T 15HD 45 and TP T A 45 • Reference Information TP T 15HD 45 and TP T A 45 • Reference Information
Reference Information, cont’d
A-3
S/N ................................................ >63 dB at maximum output (unweighted)
Crosstalk ....................................... <-80 dB @ 1 kHz, fully loaded
Stereo channel separation .......... >80 dB @ 1 kHz
CMRR ............................................ >33 dB @ 20 Hz to 20 kHz
Audio input — audio models
Number/signal type
TP T A 45 ........................... 1 stereo, unbalanced
Connectors
TP T A 45 ........................... (1) 3.5 mm mini jack
Impedance
TP T A 45 ........................... >10k ohms, unbalanced, DC coupled
Nominal level ............................... -10 dBV (316mV)
Maximum level ............................ +5.5 dBu, (unbalanced) at 1%THD+N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu.
Audio output — refer to the TP Receivers Family
User’s Manual, part #68-547-02
General
Power
TP T 15HD 45 .................... 12 VDC, 1.0 A, external
TP T A 45 ........................... Shared with the TP T 15HD 45 transmitter
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, noncondensing
Operating +32° to +122°F (0° to +50°C) /
10% to 90%, noncondensing
Rack mount .................................. No, but mountable in a 45 mm x 45 mm
opening
Enclosure type .............................. Metal
Enclosure dimensions
TP T 15HD 45, TP T A 45
Faceplate ................... 1.8" H x 1.7" W x 0.8" D (45 mm H x 45 mm
W x 20 mm D)
Device ........................ 1.1" H x 1.6" W x 1.2" D (29 cm H x 41 mm
W x 30 mm D)
(Depth excludes connectors.)
Product weight
All models ......................... 1.0 lbs (0.5 kg)
Shipping weight
Reference Information
A-2
Specifications
Video — video models
Number/signal type ................... 1 set of proprietary analog signals
Connectors
TP T 15HD 45 .................... (1) 8-pin spring force captive wire
connector
Video input — video models
Number/signal type
TP T 15HD 45 .................... 1 analog RGBHV, RGBS, RGsB, component
video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM
composite video from a single source; or
3 NTSC/PAL composite video from a
single source
Connectors
TP T 15HD 45 .................... (1) 15-pin HD female (Mac and Sun/SGI to
VGA adapters are available)
Nominal level ............................... 1 V p-p for Y of component video and
S-video, and for composite video
0.7 V p-p for RGB
0.3 V p-p for R-Y and B-Y of component
video, and for C of S-video
Minimum/maximum levels ....... 0.3 V to 1.45 V p-p with no offset at unity
gain
Impedance .................................... 75 ohms
Horizontal frequency .................. 15 kHz to 130 kHz
Vertical frequency ....................... 30 Hz to 150 Hz
Return loss .................................... <-30 dB @ 5 MHz
DC offset (max. allowable) ......... 100 mV
Video output — refer to the TP Receivers Family
User’s Manual, part #68-547-02
Audio — audio models
Number/signal type ................... 1 set of analog proprietary signals
Connectors
TP T A 45 ........................... (1) 2-pin direct insertion captive screw
connector
Frequency response .................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise ................................. 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal
level