Electrolux 1051 VI fele - Manual (Page 24)

25 24
Selection of the desired wash programme
Turn the programme selector dial
to the desired position: the lights
corresponding to the different
phases making up the selected
programme light on.
Selection of the spin speed
To select the desired spin speed, press
the SPIN SPEED button: the correspond-
ing light comes on.
Selection of the STAIN, PREWASH or QUICK
WASH option
, depending on the degree of soil of the
laundry and on the type of fabric.
The corresponding light comes on.
Selection of the EXTRA RINSE and/or RINSE HOLD
option
The corresponding light(s) come on.
How to wash
95
E
60
50
40
30
60
50
40 30 40 30
40
30
PREWASH
WASH
RINSE
RINSE HOLD
SPIN
END
COLD
COTTON
EASY-CARES
COLD
COLD
PUMP OUT
WOOLLENS
DELICATES
SOAK
SOFTENERS
PUMP OUT
SPIN
SHORT SPIN
RESET
GENTLE RINSES
1000 900 700 500
SPIN
SPEED
QUICK STAIN PREWASH
EXTRA
RINSE
RINSE
HOLD
How to wash
Load the laundry
Open the door.
Place the laundry in the drum, one item at a time. Distribute laundry as
evenly as possible. Close the door.
Add detergent and additive
Pull the drawer
out till it stops.
Pour the main
wash detergent
into compart-
ment .
If you wish to
perform a pre-
wash, or a STAIN-
Action programme, pour detergent or stain remover into compartment
.
Important!
Do not use normal detergent for the STAIN-Action programme,
always use a STAIN remover such as VANISH.
Pour the fabric softener into compartment without exceeding the
“MAX” mark.
Close the drawer, pushing it fully in.
Switching the machine on
To switch the
machine on, press
the ON/OFF but-
ton: if the pro-
gramme selector
dial is on the
RESET position,
three flashing
dashes will be
displayed. If the
programme selec-
tor dial is positioned on a wash programme, the duration of that pro-
gramme will be displayed. ON
OFF