Filling with water – Euro-Pro EP480 User Manual
Page 8
8
FILLING WITH WATER
• Ensure the unit is unplugged from the main supply before
filling.
• Set the variable steam control (4) to position "MIN"
(ie. No steam)
• slide the water filling inlet cover (7) down and use the
measuring beaker (12) to pour the water in through the
filling aperture (see picture).
• Do not overfill.
Note: Regular tap water can be used up to 12 grains water hardness but if your
water exceeds this we suggest using 1/3 tap water and 2/3 distilled water.
Never use 100% distilled water as this could cause water spitting and low
steam performance.