Euro-Pro EP480 - Manual (Page 10)

10
WATER SPRAY
• Use the spray button to add moisture to stubborn wrinkles.
• First make sure that there is water in the tank.
• Press the spray button (6) slowly to get a jet spray.
• Press the spray button strongly and quickly to get a mist.
• Please note: If spray does not come out when you press the
spray button, cover the spray opening with your finger and press
a few times.
TO EMPTY THE IRON
• Always empty iron after each usage.
• After using the iron, turn the variable steam control to ‘0’
and the temperature control dial to ‘minimum’.
• Unplug the iron from the power source.
• Set variable steam control to ‘MAX’.
• Open the water inlet cover and turn the iron up-side down
over the sink with the tip pointing downward and allow the
water to flow from the opening.
• Set variable steam control to ‘0’.
• Allow iron to cool on the iron rest before storing.
WARNING: Use caution when you turn the iron up-side down- there may be hot
water in the reservoir. Burns can occur from touching hot metal
parts, hot water or steam.