Euro-Pro EP480 - Manual (Page 14)

14
Iron Troubleshooting
(continued)
• Iron may not be hot enough. Set thermostat to the ‘max’
position. Always allow iron sufficient time to heat up
(thermostat light goes off) before activating the variable
steam control.
• Auto-Off may be activated. Move iron or gently shake.
• Overuse of steam burst. Allow more time between each
burst.
• Iron may have been overfilled. Turn iron off, empty water
and follow instructions for filling.
• Steam performance may be low if iron requires
seasoning. Use regular tap water for 1or 2 tanks until
steam performance improves.
Water droplets coming from steam vents
Potential Reasons & Solutions Problem