Ericsson R520 - Manual (Page 67)

No
t f
or
C
om
m
er
ci
al
U
se
Er
ic
ss
on
M
ob
ile
C
om
m
un
ic
at
io
ns
A
B
Setting up WAP and E-mail 67
To create a data account
1. Scroll to Settings, Y ES , Data comm., Y ES , Data accounts, Y ES ,
Add account?, Y ES .
2. Select an access type: GPRS data or GSM data.
3. Enter a name for the data account.
4. Enter the settings that you have received from your operator.
For GPRS: access point name, user id and password.
For GSM data: phone number, user id and password.
Confirm each setting by pressing Y ES .
5. Scroll to Save?, press Y ES .
To enter additional settings for a data account
1. Scroll to Settings, Y ES , Data comm., Y ES , Data accounts, Y ES .
2. Select a data account and press Y ES .
3. Select Edit.
4. Select the setting you want to edit and press Y ES . Edit the setting,
press Y ES .
5. Repeat step 4 for all the settings you want to edit.
Settings for GPRS:
APN (Access point name) – the address of the external data network
you want to connect to, either an IP address or a text string.
User id – your user id to log on to the external data network.
Password – your password to log on to the external data network.
Passwd. request (Password request) – if this setting is on, you are asked
for a password each time you log on to the external data network.
Allow calls – if you want to allow incoming calls during a GPRS
session, select On. If not, select Off,
.
IP address – the IP address that the phone uses when communicating
with the network. If you do not enter a value, the network provides
you with a temporary IP address.
Advan. settings (Advanced settings) – these are optional. Consult
your network operator.
Settings for GSM data:
Phone number – the phone number of your Internet service provider.
User id, Password, Passwd. request. Same as for GPRS above.