Appendix, Operating wireless mouse, Lc-xt1 – Eiki LC-XT1 User Manual
Page 42
LC-XT1
.
NOTE: When the computer has no mouse
port, connect the Serial Port of the
computer to Control Port of the projector
with the Control Cable for Serial Port
The Wireless Remote Control Unit is not only able to operate the projector but also usable as a
wireless mouse
for most Personal Computers. The POINT buttons and the two CLICK buttons are used for the wireless mouse
operation.
The wireless mouse is available only when PC mouse pointer is displayed on the screen. When the menu or the indicator of the
projector is displayed on the screen instead of the PC mouse pointer, the wireless mouse
cannot be used.
1
Connect the mouse port of your computer to the Control Port of
the projector with the Control Cable. (Refer to page 12 to 15
for
connection.)
2
Turn the projector on first, and then turn on your computer. When the