Eiki LC-XT1 - Manual (Page 39)

LC-XT1
.
1
Press the MENU button and the ON-SCREEN MENU
will appear. Press the POINT LEFT/RIGHT buttons
to select SETTING and press the SELECT button. Another
dialog box SETTING Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the item that you want to set, and
then press the SELECT button to set
it (For example “On” or
“Off”).
Power management
This function turns the Projection Lamp off when the projector detects signal interruption and the projector is not used for a certain
period in order to reduce power consumption and maintain the Lamp-life. (This projector is shipped with this function ON.)
Power Management function operates to turn the Projection Lamp off when the input signal is interrupted and the projector is not
operated over 5 minutes. This function operates as follows;
1. When the signal is interrupted, “No signal” and the counting down (5 minutes) display appears.
2. When the Projection Lamp turned off, the READY indicator turns off.
3. After 90 seconds, the READY indicator flashes and the Lamp can be turned on
again (Power Management mode).
In this Power Management mode, the Projection Lamp is automatically turned on
when the input signal connected or the projector is operated with any button on the
Side Control or the Remote Control.