Eiki LC-XT1 - Manual (Page 34)

LC-XT1
.
1
Press the MENU button and the ON-SCREEN MENU
will appear. Press the POINT LEFT/RIGHT buttons to
select SCREEN and press the SELECT button. Another
dialog box PICTURE SCREEN Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the function that you want to
select
and then press SELECT button.
NOTE
•
The True and the Digital Zoom cannot be
operated when “RGB”, “480p”, “575p”,
“HDTV720p”, “HDTV1035i” or
“HDTV1080i” is selected on the SYSTEM
MENU (P28 and 29).
•
This projector cannot display any resolution
higher than 1280 X 1024. If your computer’s
screen resolution is higher than 1280 X 1024,
reset the resolution to the lower before
connection the projector.
•
The image data in other than XGA (1024 X
768) is modified to fit the screen size in the
initial mode.
•
The normal “Panning Operation” may not
function properly if the computer system
prepared with the “PC Adjust” is used.