Eagle Electronics FISHEASY 320C - Manual (Page 73)

71
To turn on FishTrack:
(Note: These instructions will turn on FishTrack and Fish I.D. at the
same time.)
1. From the Sonar Page, press MENU |
↓ to
S
ONAR
F
EATURES
| ENT .
2. Press
↓ to
F ISH ID D EPTHS
| ENT | EXIT | EXIT .
To turn off FishTrack, repeat these instructions. Turning off FishTrack
in this manner will not turn off Fish I.D. symbols.
Sonar Features menu with Fish I.D. Depths selected. When the check
box to the left is checked, the feature is on. At right, Sonar Page show-
ing Fish I.D. symbols and FishTrack depths turned on.
HyperScroll

See the entry on Ping Speed, which controls the HyperScroll feature.
Noise Rejection
See the entry on Advanced Signal Processing in this section.
Overlay Data
To change the digital data shown on top of the sonar page:
1. Press MENU |
↓ to
O VERLAY D ATA
| ENT .
2. Press
↓ or ↑ to select Data Type|
ENT .
Symbols with
FishTrack depths