Eagle Electronics FISHEASY 320C - Manual (Page 57)

55
Display showing Sensitivity Control Bar.
NOTE:
If you want to change the sensitivity in Manual Mode, first turn off
Auto Sensitivity: from the Sonar Page, press
MENU |
↓ to
A
UTO
S
ENSITIVITY
| ENT |
↑ to
S
ENSITIVITY
| ENT . Press
↓ or ↑ to pick a different
sensitivity setting. When it's set at the desired level, press EXIT .
Important Tip:
While you are experimenting and learning, it's possible to scramble
the settings so that the sonar picture disappears from your screen.
If that happens, remember that it's easy to switch back to full
automatic operation by simply restoring the factory auto settings.
Here's how:
To Restore Factory Settings
1. Press MENU | MENU |
↓ to
R
ESET
O
PTIONS
| ENT .
2. The unit asks if you want to reset all the options. Press
↑ or ↓ to
Y ES
| ENT . All options are reset, and the unit reverts back to the
original settings.
Fish Symbols vs. Full Sonar Chart
You may have noticed in the quick reference that we used fish arches in
full sonar chart mode for our example, and not the popular Fish I.D.

fish symbol feature. Here's why.