Epson R210 - Manual (Page 6)

9)Nineth step: Nozzle check
Usual
Broken line
进入打印机喷嘴检查选项
The nozzle check patterns are in broken-line, mostly because of small dusk entered into the nozzle, after
repeated cleaning, if there is still a few broken line, pls let the printer don’t work about 1 hour, then print
the nozzle check pattern, maybe it works well.
4、Reset Procedure:
If the indicator light flashing when printing, it tells that you need to reset the chip to full
status. Please turn off your printer for about 30 seconds and switch it back on. Ink meter bar
shall show full ink. You can start printing as usual.
5、Refill Ink: