Warning danger, International, Symbols equipment – Echo PAS-2601 EN User Manual
Page 4
4
4
INTERNATIONAL
SYMBOLS
EQUIPMENT
WARNING DANGER
• Use only ECHO approved attachments for Pro Attachment Series
models. Serious injury may result from the use of a non approved
attachment combination. Read and comply with all safety
instructions listed in this manual and attachment manual.
• ECHO, INC. will not be responsible for the failure of cutting
devices, attachments or accessories which have not been tested
and approved by ECHO for use with this Pro Attachment Series.
Before operation a complete check of the unit must be performed;
•
Check unit for loose/missing nuts, bolts and screws. Tighten
and/or replace as needed.
•
Inspect fuel lines, tank and area around carburetor for fuel leaks.
DO NOT operate unit if leaks are found.
•
Inspect guards for damage and ensure that they are securely in
place. Replace if guard is damaged or missing.
•
Check that the attachment is firmly attached and in safe operating
condition.
IMPORTANT
Use of the Brush Cutter on U.S. Forest land and the states of
California, Oregon and Washington requires installation of
optional Muffler Bracket Kit P/N 10099057730.
Symbol
description/application
Symbol form/shape
Symbol
description/application
Symbol form/shape
Hot
Surface
Carburetor adjustment
- Idle speed
Carburetor adjustment
- High speed mixture
Symbol
description/application
Symbol form/shape
Symbol
description/application
Symbol form/shape
Read and understand
Operator's Manual.
Wear eyes, ears and
head protection
Emergency stop
Fuel and oil mixture
Finger Severing
Carburetor adjustment
- Low speed mixture
Safety/Alert
Avoid all power
lines. This unit is
not insulated
against electrical
current.
Do not operate
closer than 15 M
(50 ft.) from
electrical
hazards.
Keep bystanders
at least 15 meters
(50 feet) away.
Plan retreat path
from falling
objects.
Wear hand
protection. Use
two handed.
DO NOT smoke
near fuel.
DO NOT allow
flames or sparks
near fuel.
Wear slip
resistant foot
wear.
Engine choke
control.
Ignition
ON/OFF
Chain lubrication
Primer bulb