Echo PAS-2601 EN - Manual (Page 12)

12
S
PECIFICATIONS
* The RPM range shown applies for all attachments. Refer to your attachment Operator's Manual "Specifications"
section for proper RPM specifications.
Specifications, descriptions and illustrative material in this literature are as accurate as known at the time of publication,
but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not
include all standard equipment.
MOD EL PAS-2601
Shaft L ength 756 mm (29 .8 in.)
Unit W id th 1015 mm (40.0 in.)
Width 222 mm (8.75 in.)
Height 241 mm (9.50 in.)
Weight (dry) w/C utter Head 3.9kg (8.6 lb.)
Engine Type Air cooled, two-stroke, single cylinder gasoline eng ine
Bore 34.0 mm (1.34 in.)
Stroke 28.0 mm (1.10 in.)
D isplacement 25.4 cc (1.55 cu. in.)
Exhaust Spark Arrestor Muffler
C arburetor Walbro dia phragm model W YJ w/purge p ump
Ignition S ystem C DI (capacitor discharge ignition)
Spark Plug NGK BP M-7Y (Gap 0.65 mm (0.026 in.)
Fuel Mixed (Gasoline a nd Two-stroke Oil)
Fuel/Oil Ratio 50:1 E CHO High Performance, two-stroke air cooled engine oil
Gasoline
89 Octane unlead ed. D O NOT use fuel conta ining methyl alcohol, more than
10% ethyl alco hol or 15% MTBE.
Oil 50:1 E CHO High Performance, two-stroke air cooled engine oil
Fuel Tank Cap acity 0.64 lit. (21.6 US fl. oz.)
Starter System Automatic Rewind Starter
C lutch C entrifugal Type
D rive Shaft 6.35 mm (1/4 in.) flexible shaft
Idle Sp eed 2400 - 3000 RPM
Wide Open Throttle S peed (W.O.T.) 9500 - 11000 RP M