Eiki LC-XB30 - Manual (Page 34)

34
Computer Input
This projector has the picture screen resize function, which enables you to customize the image size.
Press the MENU button and the On-Screen Menu will
appear. Press the Point
7 8 buttons to move the red frame
pointer to the Screen Menu icon.
1
Move the red frame to the
function and press the SELECT
button.
Press the Point d d button and move the red frame pointer to
the function that you want to select and then press the
SELECT button.
2
✔
Note:
• This Screen Menu cannot be operated when 720p(HDTV),
1035i (HDTV), or 1080i (HDTV) is selected in the PC
System Menu (p28).
• The True and Digital zoom +/– cannot be selected when
480i, 575i, 480p, or 575p is selected in the PC System
Menu (p28).
• This projector cannot display any resolution higher than
1280 X 1024. If your computer’s screen resolution is higher
than 1280 X 1024, reset the resolution to the lower before
connecting to the projector.
• The image data in other than XGA (1024 x 768) is modified
to fit the screen size in initial mode.
• The panning function may not operate properly if the
computer system prepared in the PC Adjust Menu is used.
• When Auto setup function is "On" and used any of the Auto
setup function, Digital zoom +/- function will be canceled
then the screen will go back to the normal size.
• When selecting VGA, SVGA or SXGA in the Computer System
Selection (p28) with adjusting Keystone function uppermost