Emerson Radio MS3103 - Manual (Page 28)

2 7
Program Repeat Function
You can use the Program and Repeat functions together to continuously repeat
the programmed sequence. After programming the desired sequence press the
REPEAT button until the “ ALL DISC” indicator appears in the display, then
press the PLAY/PAUSE button to begin programmed repeat playback.
To cancel programmed repeat function press the REPEAT button until no “ ”
indicator appears in the display, or open the CD door.
Editing The Program
The player must be in the STOP mode to edit the program.
• To change a track, press MEMORY button repeatedly (until the required P–
number is displayed). Next, press or button to change the track number,
then press MEMORY button to store the change.
• To delete a track, press MEMORY button repeatedly (until the required P–
number is displayed). Next, press or button to change the track number
to 00, then press MEMORY button to store the change.
• To add a track, press MEMORY button repeatedly (until track number 00 is
displayed). Next, use CD and or buttons to select required disc and
track number, then press MEMORY button to store the change.
Track and Time Displays
• The correct time is displayed when the system is in the Standby or AUX
modes.
• In TUNER mode the radio frequency is displayed. Press the TIME-MODE/
REMAIN button to see the time. After 10 seconds the display returns to radio
frequency.
• In CD play mode the track number and elapsed playing time are displayed.
Press the TIME-MODE/REMAIN button repeatedly to cycle the display as
follows:
Remaining Time of the Track Remaining Time on the Disc Elapsed
Time of the Track Time Display Timer On setting Timer Off setting
Elapsed Time of the Track, etc., etc.
MS3103_ib012803.p65 28/1/2003, 11:36 27