JennAir Rise 24 Inch Under Counter Microwave Drawer Dimension Guide - Manual (Page 3)

JENNAIR ® UNDER COUNTER MICROWAVE OVEN WITH DRAWER - FLUSH INSTALLATION
JMDFS24JL – 23 7 /
8
" x 15 3 /
8
" x 24 9 /
16
"
OPENING/CLEARANCE DIMENSIONS
DETAILED PLANNING DIMENSIONS
3 of 6
FRONT VIEW-INSTALLATION
UNDER SINGLE OVEN
MODEL # JMDFS24JL
in cm
A Width of cutout (min.-max.) 24 3 ⁄
16
- 24 1 ⁄
2
61.4 - 62.2
B Width between side cleats 22 1 ⁄
8
56.2
C Height of cutout 17 43.2
D Height from top of cutout to
platform
16 1 ⁄
8
41.0
E Width of suggested
electrical receptacle location
4 1 ⁄
2
11.4
F
Top overlap allowance
Height of suggested
electrical receptacle location
3 7.6
G
Top of cutout to bottom of
oven (min.)
2 5.1
Top of cutout to bottom of
countertop (min.)
2 5.1
H Bottom of cutout to top of
cabinet door (min.)
2 5.1
I
Depth of cutout (min.) with
flush receptacle
23 1 ⁄
2
59.7
with non-flush receptacle 28 71.1
J Depth of side cleat 1 9 ⁄
16
3.9
K Depth from face of cabinet
to front of platform
1 7 ⁄
8
4.8
L
Depth from back of installed
microwave to back of
cabinet
3 1 ⁄
2
8.9
e Recommended electrical connection location
SIDE VIEW
ELECTRICAL REQUIREMENTS
120 V, 60 Hz, AC only, 15 or 20 A fused, grounded
circuit is required. A time-delay fuse or dedicated circuit is
recommended. Do not use an extension cord.
LOCATION REQUIREMENTS
Support structure must be able to support 100 lb (45.4 kg)
including microwave oven and contents.
FRONT VIEW-INSTALLATION
UNDER COUNTERTOP BACK VIEW
A
B
C
D
e F
J
D E
G
H
Side
Cleat*
Bottom Platform Bottom Platform
I
L K
J
A
B
e
D
F
E
G
H
Bottom Platfor Bottom Platform
C
D Side
Cleat *
Power Supply
Location
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All JennAir
® appliances are appropriately UL, CUL or CSA approved.
® /™ ©2019 JennAir. All rights reserved. W11192706B