JennAir Rise 27 Inch Built-In Microwave Oven Installation Instructions - Manual (Page 6)

6
Make Electrical Connection
The microwave oven is manufactured with a neutral (white)
power supply wire and a cabinet-connected green (or bare)
ground wire.
1. Disconnect power.
2. Feed the flexible conduit from the microwave oven through
the opening in the cabinet.
3. Remove junction box cover if it is present.
4. Install a UL listed or CSA approved conduit connector to the
junction box.
5. Route the flexible conduit from the microwave oven to the
junction box through a UL listed or CSA approved conduit
connector.
6. Tighten screws on conduit connector.
7. Complete electrical connection.
3-Wire Cable with Ground from Home Power Supply
to Microwave Oven Cable with 4 Wires
1. Connect the 2 black wires (G) together using a UL listed wire
connector.
2. Connect the 2 white wires (C) using a UL listed wire
connector.
3. Connect the 2 red wires (F) together using a UL listed wire
connector.
4. Connect the 2 green (or bare) wires (B) together using a UL
listed wire connector.
5. Install junction box cover.
Install Microwave Oven
1. Using 2 or more people, lift the microwave oven partially into
the cabinet cutout. If a spacer kit has been installed, lift the
microwave oven over it and position the microwave oven
between the guide strips.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 12 gauge copper wire.
Electrically ground oven.
Failure to follow these instructions can result in death,
fire, or electrical shock.
A
A. UL listed or CSA approved conduit connector
B
C
D
H
F
A
G
E
I
A. Cable from home power
supply
B. Green (or bare) wires
C. White wires
D. 4-wire cable from
microwave oven
E. UL listed or CSA approved
conduit connector
F. Red wires
G. Black wires
H. UL listed wire connector
I. Junction box
A B
C
C
A. Spacer bar flange
B. Spacer bar
C. Microwave oven