JennAir Rise 27 Inch Built-In Microwave Oven Flush Kit Installation Instructions - Manual (Page 3)

3
Cabinet Dimensions - Flush Installation
A 23 1 ⁄
4
" (59 cm) minimum cutout depth is required. These
dimensions will result in a 1/4" (6.3 mm) reveal on the top, a
1/4" (6.3 mm) reveal on the sides, and a 1/8" (3.1 mm) reveal on
the bottom of the microwave oven. The front face of the cleats
and platform will be visible and should be treated as a finished
surface.
*Cleats must be recessed 1 3 /
8
" (3.5 cm) from the front of the
cabinet.
Minimum Installation Clearances
For proper installation, the following minimum clearances must
exist below the cabinet opening.
Installation Above Single Built-In Oven
27" (68.6 cm) Models
A. 1
13 ⁄
16
" (4.7 cm) top cleat*
B. 27 1 /
4
" (69.2 cm) minimum width
of flush inset cutout
C. 25 7 /
8
" (65.7 cm) minimum width
of opening
D. 20 3 ⁄
16
" (51.3 cm) minimum
height of flush inset cutout
E. 17 5 ⁄
8
" (44.7 cm) recommended
cutout height
F. 11/16" (1.7 cm) side cleat*
G. 3/4" (1.9 cm) bottom cleat*
H. Recommended junction box
location
I. 40" (101.6 cm) bottom of cutout
to floor (recommended)
J. 23 1 /
4
" (59.0 cm) minimum depth
of cutout
K. 1 3 /
8
" (3.5 cm) recess from front
of cabinet
30" (76.2 cm) Models
A. 1
13 ⁄
16
" (4.7 cm) top cleat*
B. 30 1 /
4
" (76.8 cm) minimum width
of flush inset cutout
C. 28 7 /
8
" (70.8 cm) minimum width
of opening
D. 20 3 ⁄
16
" (51.3 cm) minimum
height of flush inset cutout
E. 17 5 ⁄
8
" (44.7 cm) recommended
cutout height
F. 11/16" (1.7 cm) side cleat*
G. 3/4" (1.9 cm) bottom cleat*
H. Recommended junction box
location
I. 40" (101.6 cm) bottom of cutout
to floor (recommended)
J. 23 1 /
4
" (59.0 cm) minimum depth
of cutout
K. 1 3 /
8
" (3.5 cm) recess from front
of cabinet
A
G
H H
B
C
D E
F
I
J
K
A
B
C
A. Upper cabinet
B. Lower single oven*
C. 1" (2.5 cm) from top of oven
Front View Side View
06-May-2019 13:38:40 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")