Playing cassette tapes – Emerson Radio PD3811BL User Manual
Page 16

1 5
PLAYING CASSETTE TAPES
1.) Open the cassette door by pressing the STOP/EJECT
key..
2.) Place a pre-recorded cassette tape into the slots on the inside of the door with
the exposed tape facing up and the full reel on the right side.
3.) Slide the function AM/FM ST./TAPE/CD selector switch to the TAPE position,
4.) Press the cassette PLAY
key to begin playback.
The POWER Indicator comes ‘On’.
5.) Adjust the VOLUME and BASS BOOST control as desired.
6.) To advance the tape rapidly press the F.FWD
key. To stop the tape before it
ends press the STOP/EJECT
key..
7.) To rewind the tape rapidly press the REWIND
key. To stop the tape before
it ends press the STOP/EJECT
key..
8.) When the tape ends the Automatic Stop System releases the PLAY
key and
shuts off the tape motor. You may then open the cassette door, remove your
tape, turn it over and play the other side if desired.
9.) When you are finished listening stop the tape, open the door, remove the tape
and close the door. If you are playing a tape and then switch to the AM, FM ST.
or CD function be sure to press the STOP/EJECT
key to disengage the
tape mechanism. This prevents excess wear and tear on the mechanism.
PD3811BL_060304.p65
3/6/2004, 18:01
15