Emerson Radio PD3811BL - Manual (Page 14)

1 3
PROGRAMMED PLAYBACK
You can program up to 20 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is playing
press the STOP button to stop playback before you begin the programming
steps below.
1.) Slide the function AM/FM ST./TAPE/CD selector switch to the CD position,
insert your disc in the player, close the door, and wait until the total track number
appears in the display.
2.) Press the PROGRAM button once. The PROGRAM
Indicator and program memory “0” begin flashing in the
display.
3.) Use the / buttons to select the first track to be programmed.
Example: Track 8.
4.) When track number “8” flashes in the display, press the PROGRAM button
once again to enter the track “8” in program memory number “01”.
Track number “8” disappears and “0” flashes again in
the display, indicating that you may now select a track
to be entered in program memory number “02”.
5.) Use the or buttons to select the next track to be programmed.
When the desired track number appears in the display press the PROGRAM
button again to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 20 tracks in the program memory.
When the memory is full, the dashes “ – – ” flash in the
LED display.
PD3811BL_060304.p65 3/6/2004, 18:01 13