Emerson Radio PD3811BL - Manual (Page 15)

1 4
7.) To begin programmed playback press the PLAY/PAUSE button.
The LED display will show the first programmed track
and playback will begin on that track. The PROGRAM
Indicator flashes.
After the last programmed track has played the player stops but the programmed
tracks remain in the memory.
To play the programmed tracks again, press the PROGRAM button and then the
PLAY/PAUSE button.
To cancel the programmed sequence from memory, press the STOP button at
programming mode, open the CD door, or move the function selector switch to the
TAPE (power off) position.
PROGRAMMED REPEAT Playback
You can use the Program and Repeat features together to continuously repeat a
programmed sequence of tracks.
First, program the desired tracks according to Steps 1 through 7 in previous page.
When Programmed Playback begins press the REPEAT button twice to activate
the All Tracks Repeat feature.
The REPEAT Indicator appears in LED display and all the
tracks in your programmed sequence will be repeated
continuously.
To cancel Programmed Repeat Playback press the STOP button until both the
PROGRAM and REPEAT Indicators go ‘Off’.
PD3811BL_060304.p65 3/6/2004, 18:01 14