Electrolux 61502 G - Manual (Page 19)

19
Fitting the hob to the worktop
Before fitting the hob into the cut out,
a sealing gasket supplied with the
hob must be fitted to the edge of the
cut out. It is essential that no gaps
are left in this seal in order to prevent
spillage near the hob seeping into the
cabinet below.
1) Place the sealing gasket
all around the edge of the
cut out.
2) Place the hob into the cut
out and secure it by
means of the relevant
fixing clamps and screws,
as shown in the diagram.
3) Remove the excess seal
The edge of the hob forms a double seal which prevents the ingress of liquids.
FO0199
a
Seal