Edirol MA-1EX - Manual (Page 11)

11
Getting Connected and Installing Drivers English
■
Volume Control setting
If you have installed the Standard driver,
the MA-1EX can use the Windows volume
control to adjust the output volume.
1. Open the Volume Control .
Click the Windows Start menu, and select
Programs (or in Windows XP, All
programs ) | Accessories |
Entertainment | Volume Control .
* What you actually see on your computer
screen may be different, depending on your
computing environment and the operating
system you’re using.
* If the Volume Control is not installed on
your computer, use the Control Panel icon
Add or Remove Programs to install it. For
details on installation, refer to the Windows
manual or Help.
2. Raise or lower the slider to adjust the
volume of the MA-1EX.
This will change the volume of the MA-
1EX’s speaker output.
Items that can be set
*1 If the CD playback volume does not
change when you adjust this control, then
change the WAVE volume.
• You will be able to use the MA-1EX at the
best audio quality if you set the Volume
Control volume to the maximum setting.
• If Mute is checked or if the slider is
lowered all the way, no sound will be
output from the MA-1EX.
■
Check whether there is
sound
Now we will check whether connections
are correct.
1. Open the Control Panel .
Windows XP users
1. From the Windows start menu,
choose Control Panel .
2. In “Pick a category,” click Sound,
Speech, and Audio Devices .
3. In “or Pick a Control Panel icon,”
click the Sounds and Audio
Devices icon.
Windows 2000/Me users
1. Click the Windows Start button,
and from the menu that appears,
select
Settings | Control Panel .
2. In Control Panel , double-click the
Sounds and Multimedia icon.
If the Sound and Multimedia icon
is not displayed, click “Show all
control panel options” in the
frame at the left.
Windows 98 users
1. Click the Windows Start button,
and from the menu that appears,
select
Settings | Control Panel .
2. In Control Panel , double-click the
Sounds icon.
2. Click the Sounds tab.
3. In Program Events (Sound Events,
Events), click the desired sound, then
click .
Sound should be heard from the MA-1EX.
If you hear sound, the MA-1EX is
correctly connected to your computer,
and the driver has also been installed
correctly.
* If you don’t hear sound, refer to
Troubleshooting (p. 24) and take the
appropriate measures to solve the problem.
WAVE Controls the volume of
sound output from “MA-
1EX (or USB Audio Device)”
audio output device.
SW
Synth Controls the volume of the
software synthesizer built
into Windows.
CD
Player Controls the volume of “au-
dio CDs” on the internal CD-
ROM drive of the computer.
(*1)
MA-1EX_efgis.book 11 ページ ２００５年１０月３１日 月曜日 午後２時３０分