Epson DREAMIO EH-DM3 - Manual (Page 27)

25
Quic
k Star
t
The break function is useful if, in the middle of a
movie, you want to get up or move around, get a drink,
or some food, and so on. By simply pressing the
button you can pause the disc being played until you
can get up to turn the lights on in the room.
Press during playback.
• The projection lamp remains lit, whilst the
projected image disappears. flashes in the
lower right portion of the screen.
• The screen darkens after about five minutes if
the unit is left in break mode without any
operations being made. Additionally, after
approximately 30 minutes have elapsed, power
to the unit automatically turns off.
• Press
to return to the state before the break
button was pressed. If the power has switched
off, press to switch the power back on.
You can select a picture quality to correspond to the
brightness and other conditions of your room.
A
Press .
The currently selected color mode name is
displayed on the screen.
B
While the color mode name is displayed,
press
repeatedly until the desired
color mode appears.
After waiting a few seconds, the color mode
name disappears and the picture quality changes.
• Game is selectable only when is turned on.
Set the "Auto Iris" in the Visual Setup menu.
sp. 58
When "Auto Iris" is on, the light intensity from the
lamp is automatically controlled according to the
brightness of images, and you can get higher contrast
and rich images.
When the color mode is set to "Auto", you cannot make
the setting.
A
Press , and then select "Image" -
"Auto Iris".
B
Select "On" by pressing to
confirm the selection.
C
Press to exit the menu.
Press during playback.
• Sound stops coming from the speakers and
headphones.
• Press
to return to normal playback. The
former volume is also restored when power to
the unit is turned on again.
• Operations cannot be performed when the disc
menu is displayed.
• When you press any of the following buttons,
break mode is cancelled and the function of
the button you pressed is performed.
, , , ,
Temporarily using the projector’s
light as illumination (Break)
Color Mode
(Auto colour Optimiser)
: Select the best mode
for your surroundings.
: Suitable for use in a
room with dim lighting.
: Suitable for use in a
pitch-dark room.
: Suitable for playing a
game with high speed
movement in a bright
room with the outside
light shielded.
: Suitable for use in a
bright room with the
outside light shielded.
Adjusting the light intensity (Auto Iris)
Mute