Electrolux B9831-5 - Manual (Page 13)

Meat programmes with weight input
If you set the weight of the meat, the appliance calculates the roasting time.
1. Use or to set the meat programme.
The weight flashes.
2. While the weight flashes, use or to set the weight of the meat.
The setting changes in steps of 0.1 kg (for POULTRY in steps of 0.2 kg).
The display shows the length of the programme. The time counts down.
If you do not change the weight in less than 5 seconds, the meat programme starts. To
change the weight after the programme starts, use in less than 2 minutes after the
programme starts.
3. For POULTRY meat programme turn the food when you hear an acoustic signal and
the display shows TURN-OVER MEAT .
When the meat programme is completed, you will hear an acoustic signal.
Meat programmes with meat probe
When you install the meat probe, you can find more meat programmes in the OVEN FUNC-
TIONS menu.
1. Switch on the appliance and install the meat probe.
The display shows MEATPROBE and flashes.
2. Use or to set the MEATPROBE programme.
When the MEATPROBE programme is completed, you can hear an acoustic signal.
Use any button to switch off the acoustic signal.
3. Remove the meat probe.
WARNING!
The meat probe is very hot. There is a risk of burns when you remove the meat probe.
Options menu
OPTIONS MENU
RECIPE MENU
MEMORY MENU
CLEANING MENU
SETTINGS MENU
1. Use to open the Options menu.
2. Use or to set the menu option.
The menu status bar shows the position in the menu.
3. Use to open the menu.
Going back in the menu
Use the menu option BACK to go back to a higher menu.
Canceling a selection
Push and hold
to cancel a setting procedure.
Daily use 13