Enviro C-10825 - Manual (Page 14)

14
Installation
H
EARTH
P
AD
P
EDESTAL
I
NSTALLATION
:
Carefully place the back of the pellet appliance on the pallet and install the hearth pad. Align the holes in
the hearth pad and the unit and install the four (4) screws provided.
Place the unit on its back and install the hearth pad using the four screws provided
This unit can be installed on a combustible floor due to the built in pedestal hearth pad (for example
linoleum, hardwood flooring). If this unit is to be installed onto a carpeted surface, a hearth pad must
be used for stability.
This unit is supplied with four (4) leveling legs for uneven surfaces. Adjust these leveling legs until unit
is level.
��������
���� ��
Figure 8: Installing Hearth Pad Pedestal onto EF5.