Echo SRM-260U - Manual (Page 4)

4
Shaft Decal
WARNING DANGER
• This unit can be dangerous and cause serious injury if improperly used. To
reduce injury risk to operator, helpers and bystanders, read and understand
the Operator's and Safety manuals.
• Blindness can occur from objects that are thrown or ricocheted even with
shield in place. Operators, helpers and bystanders must wear ANSI Z87.1
approved eye protection.
• Always wear hearing protection when operating unit.
• Prevent accidental contact with unit and any cutting attachment. Maintain a
15M (50 ft.) radius, DANGER ZONE surrounding the operator. ONLY the
operator, dressed in proper protective clothing should be in the DANGER
ZONE.
• Beware of KICKOUT (blade thrust) when using blades. Special precau-
tions are necessary for blade operation, see your Operator's and Safety
Manuals. ONLY install ECHO approved blades on Brush Cutters (SRM)
models equipped with proper blade shield, U-handles, harness, blade collar,
nut and cotter pin.
• Blade/Cutting attachment does not stop immediately after releasing throttle.
Keep hands and feet clear of blade/cutting attachment unless engine is shut
off and cutting attachment is not moving.
• INSPECT BLADES BEFORE USE.
• DO NOT USE DAMAGED, CRACKED, BENT, DULL OR IMPROP-
ERLY SHARPENED BLADES.
• Do not remove shields, modify the unit or install attachments or parts not
approved by ECHO. Approved attachment information and replacement
Operator's and Safety Manuals are available from your ECHO dealer or by
writing: ECHO, INCORPORATED, 400 OAKWOOD RD., LAKE
ZURICH, IL 60047.
P/N 89031749030
INTERNATIONAL SYMBOLS
Hot
Surface
Carburetor
Adjustment
- Idle speed
Carburetor
Adjustment
- High speed
mixture
DESCRIPTION SYMBOL SYMBOL
"WARNING, SEE
OPERATOR'S
MANUAL
Wear eye, ear
and head
protection
Emergency
Stop
Fuel and oil
mixture
Finger Severing
Carburetor
Adjustment
- Low speed
mixture
Primer
Bulb
Ignition
ON/
OFF
Wear hand and
foot protection
Safety/Alert
Keep bystanders and helpers
away 15 m (50 ft.).
DO NOT smoke
near fuel.
DO NOT allow
flames or sparks
near fuel.
DESCRIPTION SYMBOL DESCRIPTION SYMBOL DESCRIPTION
Choke Control
"Cold Start"
Position
(Choke Closed)
Choke Control
"Run"
Position
(Choke Open)
Do not use
blades. String
line only